Example builds
Example builds
Four step-by-step walkthroughs a non-engineer can follow: what to type, and what you'll see at each stage.
Each walkthrough starts from the Speed prompt. You paste it, type a one-sentence brief, and watch the design build in your Speed tab. Then you try three follow-ups: an FEA run, a part swap with a before-and-after comparison, and the one-pager.
6-inch long-range quadA quadcopter with real catalogue motors, props and battery, sized for endurance.Counter-drone detection mastA mast that detects and locates small drones, with solar power and a battery.Two-axis EO/IR gimbalA pan-tilt gimbal for a day camera and a thermal core on a vehicle mast.Sky-scanning optical sensorA ground telescope with a 1.55 m primary mirror on an alt-azimuth mount.
How long it takes#
On claude.ai, a first build typically takes 2 to 5 minutes: about 2 minutes for the detection mast, about 5 for the 1.55 m sky sensor. Each follow-up typically takes 1 to 3 minutes.
How to read the walkthroughs#
- Type this blocks are exactly what you send. Each has a Copy button.
- What you'll see describes the Speed tab and the chat. The Agent panel in Speed shows one step for every tool call, so you can follow along there too.
- Claude may do the stages in a slightly different order, or start from one of Speed's ready-made products and adapt it. Both are fine.
Something unclear or wrong? Tell us at support@tryspeed.ai.